Siding Mounting Kit, Siding Mounting Block, Outdoor Siding Light Mounting Block with Built-in Electrical Box, Siding Mounting Plate for 1/2 inch Lap Double and 4 inch Siding, Black

¥6.00

My Store

  • 【Premium Quality】With textured and paintable white surface, this siding mounting kit is made of solid and sturdy plastic material. You may also paint the fixture to finish with your desired colors to match the color with your vinyl siding or just fine left with its natural off-white color. Good snug fit on for 1/2 inch Lap Double and 4 inch height Siding.
  • 【Compact Size】This siding mounting block set is 6.53 inches width by 10.23 inches length. Perfect solution for 4 inch height of the Vinyl Siding with double 1/2 inch width lap siding surface. The molding and blocks can be painted after being caulked. 【Note】: To stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom.
  • 【Easy to Install】This siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2.Remove the knock-out from the electrical box and insert the cable connector into the hole. 3.Put the wire through the cable connector and mount the box up with the included couple srcews. 4.Put the outside light in place on the electrical box.
  • 【Widely Applications】The siding mounting kit can mount light fixtures on all siding types, including T-111 and HardiePlank Lap Siding. It makes adding new lighting to existing siding more easy with the built in electrical box.
  • 【Package Included】There are a Mounting Block with Built-in Electrical Box, a Cable Connectors and four Mounting Screws on the package to ensure you have enough supplies to complete your projects. You could install an exterior light pn Vinyl Siding with a mounting plate as you want.

Sold Out

Add ¥150.00 more for FREE shipping!